Briticom® SFP 10GB Multimode 300m Fibre Optic Transceivers are used to interface networking devices to fibre or copper networking cables in Telecom and data applications.
Already bought this product from us? Share your experience on LinkedIn
- Optical interface compliant to IEEE 802.3ae
10GBASE-SR - Electrical interface compliant to SFF-8431
- Hot Pluggable
- 850nm VCSEL transmitter, PIN photo-detector
- Maximum link length of 300m on 2000MHz/km
MMF - Operating case temperature:
- Commerical: 0 to 70 °C , Industrial:-40 to 85 °C
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system
encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port
densities and greater bandwidth
- 10GBASE-SR at 10.3125Gbps
- 10GBASE-SW at 9.953Gbps
- Other optical links
| Parameter | Symbol | Min. | Typ. | Max | Unit | Note |
| Transmitter | ||||||
| Center Wavelength | λt | 840 | 850 | 860 | nm | |
| Spectral Width (RMS) | Pm | – | – | Note 1 | nm | |
| Average Optical Power | Pavg | -6.5 | – | -0.5 | dBm | 2 |
| Extinction Ratio | ER | – | – | – | dB | 3 |
| Transmitter Dispertion Penalty | TDP | – | – | 3.9 | dB | |
| Relative Intensity Noise | – | – | -128 | dB/Hz | 12dB reflection | |
| Optical Return Loss | – | – | 12 | dB | ||
| Receiver | ||||||
| Center Wavelength | λr | 840 | 850 | 860 | nm | |
| Receiver Sensitivity | Psens | – | 11.1 | dBm | 4 | |
| Stressed Sensitivity in OMA | – | -7.5 | dBm | 4 | ||
| Los function | Los | -30 | -12 | dBm | ||
| Overload | Pin | – | -1.0 | dBm | 4 | |
| Receiver Reflection | – | -12 | dB |
Notes
1.Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.
2. The optical power is launched into MMF
3. Measured with a PRBS 231-1 test pattern @10.3125Gbps
4. Measured with a PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12.
SFP 10GB Multimode 300m
DOWNLOAD DATASHEET
